Dış mekan LED sokak aydınlatmalarında ve yüksek güçlü projektörlerde, termal yönetim LED ömrünü doğrudan etkiler, lümen bakımı, and overall fixture reliability.
LEDs are heat-sensitive semiconductor devices. The source specification states that every 10°C increase in junction temperature (Tj) can reduce LED operating lifespan by approximately 50%.
Aydınlatma OEM'leri için, PCB layout therefore plays an important role in thermal design. A well-engineered 10×1 LED PCB düzeni, with ten LEDs arranged in a uniform linear pattern, can distribute heat more evenly than a dense or irregular LED array.
This article examines how linear LED placement, termal yollar, bakır kalınlığı, dielectric conductivity, and aluminum substrate selection work together in a Sokak lambası LED modülü PCB.
1. Why LED Layout Affects Thermal Performance
High-power LEDs generate concentrated heat around their thermal pads. If several LEDs are positioned too closely together, their thermal zones can overlap and create localized hotspots.
A 10×1 linear layout separates ten LED heat sources at relatively consistent intervals. This creates a more predictable path for heat to spread through the PCB and into the underlying aluminum heat sink.
10×1 Doğrusal Düzen
With evenly spaced LEDs, engineers can establish parallel copper and thermal paths along the PCB.
The main thermal advantages include:
- More uniform LED spacing
- More predictable heat distribution
- Reduced central heat accumulation
- Consistent thermal via placement
- Easier integration with linear optical lenses
- More standardized PCB manufacturing
Each LED acts as a distributed heat source rather than contributing to a concentrated central thermal zone.
Clustered or Matrix Layout
A dense matrix can concentrate multiple heat sources within a relatively small PCB area.
When thermal zones overlap, merkez bölge daha yüksek ısı yoğunluğuna maruz kalabilir. Bu, bağlantı sıcaklığını artırabilir ve lümenin erken tükenmesine veya renk kaymasına katkıda bulunabilir..
Öyleyse, LED yerleşimi, toplam güç yoğunluğu ve soğutucuya giden termal yol ile birlikte değerlendirilmelidir..
2. 10×1 LED Modülün Termal Yolu
Etkili Sokak lambası LED modülü PCB ısıyı LED bağlantı noktasından mümkün olduğunca verimli bir şekilde uzaklaştırmalıdır.
Tipik termal yol:
LED Bağlantı → Termal Ped → Bakır Katman → Termal Yollar → Dielektrik Katman → Alüminyum Yüzey → Harici Isı Emici → Ortam Havası
10x1 düzeni, her LED'e nispeten tutarlı bir termal alan vererek ve yapı yoluyla standartlaştırarak bu yolu destekler.
Ağır Bakır İzleri
A linear arrangement allows engineers to create relatively continuous copper paths between LED locations and the PCB perimeter.
Yüksek güçlü uygulamalar için, the source specification recommends approximately 2 oz–3 oz copper, equivalent to about 70–105 μm.
Thicker copper can spread heat laterally across the PCB before transferring it through the dielectric layer into the aluminum core.
3. Thermal Via Design Under Each LED
Thermal vias provide a vertical heat-transfer path from the LED thermal pad toward the metal substrate.
For the specified high-power LED module design, the recommended configuration is:
- 6–12 thermal vias per LED thermal pad
- 0.3–0.5 mm via drill diameter
- 1.0–1.2 mm via pitch
- Thermally conductive epoxy plugging or copper-capped VIPPO construction where required
These parameters help transfer heat away from the LED package while maintaining suitable soldering conditions during SMT reflow.
The source specification indicates that a 10-via array under a 5050 LED pad can reduce vertical thermal resistance by up to 30%–40%.
Fakat, the actual thermal result depends on the complete PCB stack-up, via construction, LED paketi, lehim arayüzü, ve ısı emici tasarımı.
4. Selecting the Aluminum MCPCB Structure
The aluminum substrate provides the structural and thermal foundation of a metal core PCB.
Dış mekan LED aydınlatma uygulamaları için, engineers need to balance substrate thickness, dielectric conductivity, bakır kalınlığı, and mechanical flatness.
| Aluminum MCPCB Parameter | Önerilen Spesifikasyon | Termal / Mechanical Function |
|---|---|---|
| Aluminum Base Thickness | 1.5–2.0 mm | Provides structural flatness and supports contact with the main heat sink |
| Aluminum Alloy | 5052 veya 6061 | Provides the specified mechanical substrate structure |
| Dielektrik Isı İletkenliği | 2.0–8,0 W/m·K | Improves heat transfer from the copper layer to the aluminum core |
| Bakır Folyo Kalınlığı | 2.0–3,0 ons / 70–105 μm | Isıyı LED termal pedlerden yana doğru yayar |
Daha yüksek iletkenliğe sahip bir dielektrik katman, bakır devre ile alüminyum alt tabaka arasındaki termal bariyeri azaltabilir.
Yüksek güçlü sokak aydınlatması için, Bu nedenle PCB spesifikasyonu izole edilmiş bir elektrik bileşeni yerine komple termal sistemin bir parçası olarak seçilmelidir..
5. 10×1 LED PCB'ye Hangi Güç Aralığı Uyur??
10×1 doğrusal modül, yaklaşık olarak yüksek güçlü LED aydınlatma uygulamaları için uygundur. 30Modül başına W–100W kaynak spesifikasyonlarında açıklanan aralık.
Kullanırken 5050 veya 3535 LED başına yaklaşık 3W–5W LED'ler, tek bir 10x1 modül yaklaşık olarak sağlayabilir 30G–50W LED gücü.
Daha büyük için 150W–300W sokak lambaları, manufacturers can combine multiple standardized 10×1 LED PCB modules across a larger aluminum heat-sink housing.
This modular approach helps maintain consistent LED spacing and creates defined airflow and thermal channels across the fixture.
6. 10×1 Linear PCB vs. Clustered Matrix Layout
For procurement teams evaluating different LED module structures, the following comparison highlights the main engineering differences.
| Termal & Mechanical Factor | 10×1 Linear LED Layout | Clustered Matrix Layout |
|---|---|---|
| Thermal Distribution | More uniform and symmetrical | Higher center heat concentration |
| LED Aralığı | Consistent linear spacing | Often denser in selected areas |
| Thermal Via Placement | Standardized 6–12 vias per LED pad | More constrained by compact geometry |
| Heat-Sink Integration | Easy to arrange along linear channels | Requires more complex thermal planning |
| Optik Uyumluluk | Suitable for linear LED lenses | May require customized optical structures |
| Manufacturing Consistency | High SMT repeatability | More complex thermal distribution during assembly |
| Typical Engineering Benefit | Predictable thermal and optical structure | Higher layout flexibility within compact areas |
The choice should ultimately depend on LED power density, optik gereksinimler, fixture dimensions, and the available heat-sink structure.
7. PCB Layout Considerations for Outdoor LED Street Lights
Güvenilir Sokak lambası LED modülü PCB requires coordination between electrical, termal, optik, and mechanical design.
Before finalizing the PCB, procurement and engineering teams should review:
LED Power Density
Calculate the total LED power and determine whether heat sources are sufficiently distributed across the PCB.
Thermal Via Structure
Verify the number, çap, pitch, and construction of thermal vias beneath each LED thermal pad.
Bakır Kalınlığı
Select 2–3 oz copper where the application requires greater current capacity and lateral thermal spreading.
Dielektrik İletkenlik
Consider dielectric thermal conductivity from approximately 2.0–8,0 W/m·K according to the required thermal performance.
Aluminum Base
A 1.5–2.0 mm aluminum substrate can provide the specified combination of structural rigidity and heat-sink interface stability.
Heat-Sink Interface
The PCB must maintain effective thermal contact with the external aluminum heat sink. Flatness and interface quality directly affect the final thermal resistance of the complete assembly.
8. Key Takeaways for LED PCB Temini
The thermal performance of an outdoor LED fixture starts with the relationship between LED yerleşimi, PCB yığınlaması, termal yollar, and heat-sink structure.
For the specified 10×1 architecture:
- A 10×1 linear LED layout distributes heat sources more uniformly.
- 6–12 thermal vias can be placed beneath each LED thermal pad.
- 0.3–0.5 mm via diameters Ve 1.0–1.2 mm pitch provide the specified via structure.
- 2–3 oz copper improves lateral heat spreading.
- A 2.0–8.0 W/m·K dielectric layer supports heat transfer into the aluminum core.
- A 1.5–2.0 mm aluminum substrate provides the specified structural foundation.
- A single module can support approximately 30G–100W, while multiple modules can be combined for 150W–300W street-light systems.
Aydınlatma OEM'leri için, the goal is not simply to select a high-conductivity PCB. Design the complete thermal path from the LED junction through the PCB and into the external heat sink.
By coordinating 10×1 LED placement, thermal via arrays, ağır bakır, dielectric conductivity, and aluminum substrate design, engineers can build a more predictable thermal architecture for high-power outdoor LED lighting.

